3.2.3
Mounting the drain elbow
Avoid the following when mounting:
n
sagging
n
tensile strain
Alternatively: Secure the drain elbow onto the wall or floor without
the fixing material supplied, taking into account the fixing sizes.
INFO! Installing pipelines vertically through the bare concrete
floor is only possible with the drain elbow (model 8095, Art. No.
713744). The screed height must be at least 85 mm.
3.2.4
Set and clad the WC element
Mark the contour of the hard foam block onto the gypsum cladding
panel.
Remove the hard foam block and cut out the contour (finished floor
to middle of threaded rods 350 mm).
NBY
Handling
Prevista Dry WC element height-adjustable after installation by the installer
21 from 29
