3.2
Rechargeable battery
Directions for using the charger and the lithium-ion bat‐
teries can be found in the accompanying instructions.
Only use original accessories (e.g. rechargeable batteries) with the
Viega press tools, as only these were developed and adapted specifi‐
cally for use with the Viega press connector systems. Viega does not
check whether accessories from other manufacturers are suitable for
use with Viega press tools.
▶
Insert the battery into the device as illustrated until the battery
engages.
▶
Press both release buttons and then pull the battery out.
At the start of a pressing, a check is done to see whether there is
enough battery charge to complete the pressing. If not, the press
machine will not start. The battery has to be recharged before the next
pressing.
3.3
Viega Tool Services
You can find information on registering your press
machine in the Viega Tool Services chapter.
The full range of functions of Viega Tool Services is not
available in all markets.
n
If Viega Tool Services is not available in your market,
go to the section Viega Tool Services Lite.
The press machine can be connected to a mobile end device via Blue‐
tooth® and used with the
Viega Tool Services
app.
Inserting the battery
Removing the battery
Behaviour of the press machine when the battery is discharged
Handling
Pressgun Picco 6 Plus
19
