Viega 2295.3 Скачать руководство пользователя страница 4

Страница: 4 / 35

About these instructions for use

Trade mark rights exist for this document; for further information, go to

viega.com/legal

These instructions are a translation of the original operating instructions.

1.1

Target groups

The information in these operating instructions is directed at the fol‐

lowing groups of people:

Heating and plumbing experts and trained personnel

This product must not be used by persons who do not have the afore‐

mentioned training or qualifications.

1.2

Labelling of advisory text and safety symbols

Warning and advisory texts are set aside from the remainder of the text

and are labelled with the relevant pictographs.

DANGER!

This symbol warns of possible life-threatening injury.

WARNING!

This symbol warns of possible serious injury.

CAUTION!

This symbol warns of possible injury.

NOTICE!

This symbol warns of possible damage to property.

This symbol gives additional information and hints.

About these instructions for use

Pressgun 6 PlusPress machine with rechargeable battery and Bluetooth interface

Содержание 2295.3




































Результаты поиска

Содержание 2295.3

Отзывы:

Похожие инструкции для 2295.3

Бренды по названию

Популярные бренды

Viega 2295.3, Инструкция по эксплуатации

Результаты поиска

Содержание 2295.3

Отзывы:

Похожие инструкции для 2295.3

Бренды по названию

Популярные бренды