Manual Call Recorder Octo | Quarto © Vidicode 2011-2022
29
•
Only incoming
•
Always wait
•
Always start
•
Auto
These options work as follows:
•
When "Only incoming" is selected the message will be played
when an incoming call is answered. The message will not be
played on outgoing calls!
•
When "Always Wait" is selected the message is only played when
the Call Recorder receives a
key DTMF tone. After the message
is played the recording is started.
•
When "Always Start" is selected the message is played directly at
the start of a call and recording is started directly after the
message.
•
When "Auto" is selected the message is played automatically for
incoming calls. For outgoing calls the message is played when a
DTMF tone is received. Recording of the outgoing call is started
directly after that.
The notification is disabled as standard. Please refer to § 6.1 how to
record the message.
•
Press NEXT to move on to the next menu item or press the line
number to move to the Notification tone setting of the
corresponding line.
4.3.9
Caller ID
Caller ID will show the telephone number of the remote telephone.
Following the Notification setting as described above the display will
show:
•
Press CHANGE to select Caller ID method.
Caller ID has two basic methods; DTMF and FSK. Either one can be active
or passive. "Active" means Caller ID is activated by the Call Recorder,
"passive" means Caller ID is activated by another device on the line.
