videotronic HQ-IDC-23012P, Руководство по эксплуатации

Страница: 41 / 108

Configuration
41
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED
Press the <UP> or <DOWN> keys to alter
the sensitivity.
You can choose from 18 different values.
MIN; 1...16; MAX.
Press the <ESC> key twice to quit the
menu.
3.2.18 INITIAL
This menu enables you to reset the focus settings.
Move the arrow with the <Down> key
to the <INITIAL> menu.
Press the <ENTER> key to open the input
mode.
Press the <UP> or <DOWN> keys to
enable ON or disable OFF the function.
Press the <ESC> button to quit the menu.
3.2.19 PRESET
In this menu you can reset the camera to the factory settings.
Move the arrow with the <Down> key
to the <PRESET> menu.
Press the <ENTER> key to open the input
mode.
Press the <UP> or <DOWN> keys to
enable OK or disable CANCEL the
function.
Press the <ENTER> key to enable the
function.
The camera will be reset to the works settings.
Note: The camera will switch off for a few seconds.
Fig. 51 IR
IR INT LEVEL
IR INT LEVEL MAX
Fig. 52 INITIAL
SETUP MENU [3/4]
POSITION SAVE
H−GAIN +6
V−GAIN +6
MOTION ON.
IR ON.
INITIAL ON
Fig. 53 PRESET
SETUP MENU [4/4]
PRESET CANCEL
FREEZE OFF
FREEZE MODE
FIELD
MISC