Videotec Maximus MPXHD Delux, Инструкция по эксплуатации, Страница: 35 / 326

Instruc
tion manual - English - EN
33 MNVCMPXHDB_1822_EN
10.2.12 Directional OSD Page
The device supports definition of four pan regions
and information text video display based on the
position of the Pan & Tilt.
You can define the following settings for each area:
•
Enabled:
Each area can be configured as disabled,
enabled clockwise and enabled anti-clockwise.
•
Start:
The point in which the OSD region begins
(expressed in sexagesimal degrees).
•
End:
The point in which the OSD region ends
(expressed in sexagesimal degrees).
• The dimension and the text to display.
Start
Stop
0°
Fig. 41 Example of configuration: OSD region clockwise.
Start
Stop
0°
Fig. 42 Example of configuration: OSD region anti-clockwise.
Fig. 43
10.2.13 Encoder Parameters page
In the Encoder Settings menu, it is possible to
configure the video flows of the device (3 flows).
All the video flows can be coded with the following
characteristics: H264, MPEG4, MJPEG.
For all flows, the following options can be set:
Framerate, (fps), Bitrate limit (kbit/s), Quality, I-Frame
H264 Interval, Coding profile.
It is possible to configure the address for
configuration of multicast video streaming.
Editing this setting will cause the device to restart.
Encoders Default: The button resets the encoders
settings to default configurations.
Fig. 44