Videotec DCZ, Инструкция по эксплуатации

Страница: 19 / 84

EN - English - I
nstruc
tions manual
17
9.7.3 Modifications to the lookup chart
to define alias keys
It is possible to have several keys that all perform the
same commands (e.g. the shift keys). If a series of
alias keys are pressed together at the same time, the
pressed key event (
[K+ xx
]) is only transmitted the
first time it is pressed; the released key event (
[K-
xx
]) is only transmitted when all the keys with the
same alias have also been released.
Example: The 5 bottom keys on the keyboard act as if
they are the same key.
OPERATION / COMMAND EFFECT
Enter the programming settings
Select
4
Switches to VCOM mode
resetting the lookup chart
Disconnect and reconnect the
keyboard It restarts in VCOM mode
[BlockModeStart]
Command
This allows you to
modify the internal
memory without using
it for multiple writing
commands.
[LookupWrite84,50083]
Command
The key on row 8, column
4, is an alias of the key on
row 8, column 3
[LookupWrite85,50083]
Command
The key on row 8, column
5, is an alias of the key on
row 8, column 3
[LookupWrite86,50083]
Command
The key on row 8, column
6, is an alias of the key on
row 8, column 3
[LookupWrite87,50083]
Command
The key on row 8, column
7, is an alias of the key on
row 8, column 3
[BlockModeEnd]
Command
Saves the modifications to
the internal memory
Enter the programming settings
Check that when the 5 lower
keys are pressed, they all
transmit the same message
[K+83]
Tab. 08
9.7.2.3 Substantial modifications to the
joystick default settings
Example: If you want to use just 8 joystick keys on
the left side of the keyboard.
OPERATION / COMMAND EFFECT
Enter the programming settings
Select
5
Resets the JOYHID key
chart to default settings
Disconnect and reconnect the
keyboard It restarts in JOYHID mode
Enter the programming settings again
Select
4 It switches to VCOM mode
resetting the lookup chart
(no keys valid for the
joystick)
Disconnect and reconnect the
keyboard It restarts in VCOM mode
[BlockModeStart]
command
This allows you to
modify the internal
memory without using
it for multiple writing
commands.
[LookupWrite31,60001]
Command
Creates key 1 on row 3,
column 1
[LookupWrite32,60002]
Command
Creates key 2 on row 3,
column 2
[LookupWrite41,60003]
Command
Creates key 3 on row 4,
column 1
[LookupWrite42,60004]
Command
Creates key 4 on row 4,
column 2
[LookupWrite51,60005]
Command
Creates key 5 on row 5,
column 1
[LookupWrite52,60006]
Command
Creates key 5 on row 5,
column 2
[LookupWrite61,60007]
Command
Creates key 7 on row 6,
column 1
[LookupWrite62,60008]
Command
Creates key 8 on row 6,
column 2
[BlockModeEnd]
Command
Saves the modifications to
the internal memory
Enter the programming settings
Select
8 Switches to JOYHID mode
without resetting the
lookup chart that has just
been modified
Disconnect and reconnect the
keyboard It restarts in JOYHID mode
Check that the corresponding
LEDs come on when the keys
are pressed
Tab. 07