videomed Truelink 4, Инструкция по эксплуатации

Страница: 37 / 88

System description
80028008_030_B – 773625 – 2021-04-29
37
4.7.5 Control software
The management software of Truelink 4 Video Management
System allows to control and manage each functional unit.
There is a lower selection bar (always visible) which allows the
software sections to be uniquely identified according to the
function performed.
The sections of the selection bar are described below:
The Truelink 4 Video Management System also assures control
and management of the main devices installed in the operating
room:
– PTZ Roomcam;
– surgical lights with surgical video camera;
– Trumpf Medical operating table.
The complete functions present in the Control Software are
described in detail in the “User Interface” chapter of these
instructions for use.
1 2 3
No. Function Description Image
[1] VIDEO ROUTING The BLUE button identifies the section
of the VIDEO ROUTING function.
This function allows the distribution of
video signals connected to all
monitors installed in the operating
room.
[2] RECORDING The RED button identifies the section
of the VIDEO RECORDING function.
This function enables to record
images and videos.
[3] VIDEO CONFERENCE The ORANGE button identifies the
section of the VIDEO CONFERENCE
function.
This function allows two-way audio/
video communication.