Operation Manual
BOX CONTENTS
1. Camera module
2. Connection cable
3. User manual
SAFEGUARDS & WARNINGS
Prior to installation and use of this
product, the following WARNINGS should
only be observed.
1. Installation and servicing should only
be done by Qualified Service and
Installation Personnel.
2. Installation shall be done in accordance
with all local and national electrical and
mechanical codes.
3. Use only installation methods and mate-
rials capable of supporting four (4) times
the maximum specified load.
11/26/08
INS-20E407 Rev E
Camera Functions
Connectors and Controls
Lens options vary, but are pre-backfocused
for normal operation. Varifocal lens options
are indicated in model numbers ending in:
VA (4 to 9mm varifocals)
VB (DC Auto Iris 4 to 9mm varifocals)
WA (2.6 to 5.6mm varifocals)
WB (DC Auto Iris 2.6 to 5.6mm varifocals)
Front
Back
Power Board Controls
An optional 24VAC power board is avail-
able.
Note: Line lock is included with this
camera
Camera Settings
Push to Set White balance
The Push to Set White balance (Pt set) may
be implemented by selecting the switch
settings.
Next, focus the camera on a white back-
ground under the lighting that is to provide
illumination for the camera scene.
Push the button labeled “Push Lock White
Balance”. The camera White Balance will be
locked and will not change if the scene
changes.
M14 Board Lens
CS Lens
NTSC
PAL
NTSC
PAL
20E407 20E417 20E409 21E409
21E407 21E417 20E419 20E419
Dip Switch 1
Note- “On” Indicates “HI” Position
Function
Off
On
1 FLICKERLESS
Off (Default)
On
2 BLC
Off
On (Default)
3 M IRIS
Electronic CCD
DC Auto Iris
4 AE REF
100 IRE (Default)
80 IRE
5 AGC MAX
20dB max
(Default)
26dB max
6 AWB1
White Balance Control (see below)
7 AWB2
White Balance Control (see below)
8 AWB3
White Balance Control (see below)
Note: for DCAI 1, 3, 4 are set ON
White Balance Control
WB AUTO
MODE
Switch 6
AWB1
Switch 7
AWB2
Switch 8
AWB3
Auto Enabled
Off
On
Off
Pt Set Enabled
Off
On
On
WB Fixed Mode
Switch 7
AWB2
Switch 8
AWB3
Color Temp.
Indoor
Off
Off
Approx. 3200K
Fluorescent
On
Off
Lamp
Off
On
Approx. 4200K
Outdoor Fixed
On
On
Approx. 6300K
Dip Switch 2
Note- “On” Indicates “HI” Position
Function
Off
On
1 GAMMA
1.0 enabled
0.45 enabled
(Default)
2 AE / ME
ME - Mechanical
Exposure enabled
AE - Auto Exposure
enabled (Default)
Line Lock
DC Iris
Video GND 12VDC
Push Lock White Balance
Dip Switch 1
1 Flickerless
2 BLC
3 M Iris
4 AE Ref
5 AGC Max
6 AWB 1
7 AWB 2
8 AWB 3
Dip Switch 2
1 Gamma
2 AE/ME
ALC
Adjustment
