Doc # APN-24M8.29IP
Issue Date: 03/23/2020
Revision: C
Page 66 of 71
26.
Maintenance
Provide software reset of the camera when troubleshooting.
Restart: Camera is restarted without changing any of the settings. Use this method if the unit is not
behaving as expected.
Reset: Camera is restarted, and most current settings are reset to factory default values, but the
following settings does not reset.
•
Boot protocol (DHCP or static)
•
Static IP address
•
Default router
•
Subnet mask
•
System time
CONFIDENTIAL