Doc # APN-24M8.29IP
Issue Date: 03/23/2020
Revision: C
Page 26 of 71
15.5.
AF
Auto Focus control is used to improve image quality either manually or automatically.
Mode:
Configure the options for focusing mode. The default setting is Manual
.
Speed:
Adjusts the focus speed. The higher value means more high speed than lower value.
Lens locking:
Keeps the current lens focus status.
Enable Day & Night sync focus:
Refocuses camera every time day/night mode is changed.
Lens Calibration: When first assembling this module or after camera installation, lens calibration is
necessary.
Make sure the lens is calibrated before use.
15.6.
Day/Night
The IR cut filter prevents infrared (IR) light from reaching the image sensor.
CONFIDENTIAL