www.videofied.com
Corner Mounting Holes
Note: Only two screws are
used for corner mounting (Left
or Right)
Corner Mounting
Flat Wall Mounting
Flat Wall
Mounting
Holes
The Motion Detector IMD 200/601/702 is a
wireless, indoor motion detector designed for use
in a Videofied security system. The motion detector
includes the following features:
> Lithium batteries for long life
> Standard motion coverage lens (12m distance)
> Dual tamper function provides detection of both
wall and cover tamper.
> Transmits check-in/status signal every 8 minutes
Product Summary
Installation Guidelines
F
or an easier installation, programming and RF testing should be
done to check for good communication between the control panel
and all system devices before mounting.
Install the detector and other system devices in the following order:
>
Programming / RF Testing: Program detector and all other devices
into the control panel and test RF communication at each intended
device location to the control panel.
>
Mounting: Mount detector at the tested location.
Mounting Rules
>
Use proper tools and hardware.
>
Mount indoors in a temperature controlled environment.
>
Mount detector 2.1 to 2.3 m (6.9 to 7.5 ft.) from the floor.
>
Respect Top and Bottom side of the Motion Viewer
>
When possible, mount in a wall corner in order to aim at a complete
room
>
Mount detector on an outside wall, aimed at area to protect.
>
Do not aim detector at windows, especially those that let in direct
sunlight, or at heat sources such as lamps, fireplaces, radiators,
and heating vents.
>
Do not aim detector at moving objects such as curtains, fans or
animals.
>
Do not cover the Fresnel lens
Doc. - Ref. 214-IMD
Version : December 2014
P R O D U C T I N S T A L L A T I O N S H E E T
Indoor Motion Detector IMD 200/601/702
