Videofied SE651 Скачать руководство пользователя страница 1

www.videofied.com

Product Summary

The Outdoor Siren SE651 is a wireless siren designed for 
use in Videofied security systems. The siren includes the 
following features: 

 Totally wireless, battery operated.

 Dual tamper function provides detection for both wall  

  and cover tamper.

 Transmits check-in/status signal every 8 minutes.

Installation Guidelines

For easier installation, programming and RF testing should 
be done to check for good communication between the 
control panel and all system devices before mounting 
system devices. Install the siren and other system devices 
in the order of the following steps:

>

  Programming/RF Testing - program siren and  

  all other devices into the control panel and test  
  RF communication from each intended device  
  location to the control panel.

>

  Mounting - mount siren at the tested location.

Programming/RF Testing

The following provides summarized steps for device  
programming and testing. For complete details, refer  
to the control panel installation manual.

1

  Remove four cover  

 

screws, separate cover 

  

from siren and install  

 batteries. 

2

  Put control panel  

 

into programming/ 

 

configuration mode.

3

  Using a programmed  

 

alphanumeric keypad,  

 

proceed through menus 

 

until the display shows  

 

ADD A NEW DEVICE.

4

 Press 

Yes.

 The display  

 

shows PRESS PROGRAM 

 

BUTTON OF DEVICE.

5

  Press and release  

 

program button on siren  

 

using a paper clip end.  

 

The siren LED flashes.  

 

Wait for keypad display 

 

to show SIREN (1 - 24)  

 RECORDED.

 

To the question “REMOTE CONTROLLED?” press:  

 

No

 to be automatically controlled by the alarm panel  

 

Yes

 if the siren is controlled by the monitoring station.   

7

 Press 

Yes.

 The display shows RADIO  RANGE TEST?  

 Press 

Yes

 again. The siren LED starts flashing and  

 

keypad display shows TEST IN PROGRESS.

8

  Take the siren to its intended mounting location and  

 

make sure LED flashes continuously, indicating good  

 

communication with control panel.

9

 Press 

Yes

 to end radio range test, then press 

Esc/No.

10

  The display shows ADD A NEW DEVICES? 

 

Repeat steps 4 - 8 for remaining sirens.

11

  When finished, exit from configuration mode. 

 

6

Screws

Program Button

P R O D U C T   I N S T A L L A T I O N   S H E E T

Outdoor Siren SE651

2204-SEOIS February 2012

Made by RSI VIDEO TECHNOLOGIES

Отзывы: