Videocon DIGI NEMO, Руководство пользователя

Страница: 3 / 12

3
INSTALLATION INSTRUCTIONS ACCESSORIES
4
1.Unplug the Power Cord of the washer.
2.Gently lay down the front side of washer on a soft mat or
cushion.(Becareful not to dent the Frame.)
3.Insert the attached Bottom Cover into the hooks of Leg
by straightly pushing until it reaches into the front hooks.
4.Fasten the Bottom Cover with a screw.
5.Gently set the washer upright.
1.Choose a dry location out of sunlight for the washer.
2.Install the washer on a stable and level surface.
Location of Washer
Inclined floor Unstable floor
? Do not block the ventilation openings on the bottom of washer by carpeting when the
washer is installed on a carpeted floor.
CAUTION:
Lock Nut
Adjustable Leg
Up
Loosen ①
② Down
③ Tighten
Fundus
Installing the Bottom Cover
Bottom
Cover
Screw
Leg
Front
Back
3.Adjust the Adjustable Leg of washer if necessary to make the washer level as shown
in the figure.
The maximum permissible inclination of the supporting surface is 2 .
?
NAME OF PARTS
Cold water
Supply Hose Hot water
Supply Hose
Washer Lid
Water Supply Hose
Wash/Spin Tub
Pulsator
Drain Hose
Power Plug
Power Cord
Leg
Adjustable Leg
Frame
Control Panel
Lint Filter
Softener Dispenser
Faucet
(Close water supply
after operation)