VIDEO DOMAIN TECHNOLOGIES MEMOCAM DVR, Руководство по началу работы, Страница: 27 / 29

Checking the System
To check that the MemoCam unit was installed
successfully and is operational:
1. Make sure the Multimedia Card is inserted
in the unit (refer to
Accessing the
Multimedia Card on page 7).
2. Disarm MemoCam using the remote control
unit (refer to
Disarming MemoCam®DVR on
page 11).
3. Point the remote control unit at MemoCam
and press Rec to record a snapshot. The
Multimedia Card Status LED blinks green.
4. Remove the Multimedia Card from the unit
(refer to
Accessing the Multimedia Card on
page 7).
5. Insert the Multimedia Card into the card
reader attached to your computer or Pocket
PC.
6. View the image as described in
Viewing the
Images on page 16.
If you encounter any problems during this
process, refer to
Troubleshooting in the
MemoCam Installation Manual, or the
MemoCam Software Manual.
The MemoCam unit has an internal clock. To
configure the date and time, refer to the
MemoCam Software Manual
.
¡
21