Vicway VT 1000E, Инструкция по установке и руководство пользователя

Страница: 3 / 24

- 1 -
Important safety recommendations
The new GDO is professionally designed under the newest design idea of Vicway Australia Pty
Ltd. The installation and setting of this GDO is extremely easy. It has complete functions, gives
the users a relaxed and happy installation experience.
Safety Warnings
Warning: It is very important to read this safety warnings and follow all instructions before
installing. Or it may cause serious personal injury and/or property loss. Save these
instructions.
1. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance or its controls,
including transmitters. Keep the transmitters out of the reach of children. Cleaning and user
maintenance shall not be made by children without supervision.
2. We strongly recommend to install photocell to increase safety protection and psychological
security.
3. Before installing the drive, remove all unnecessary ropes or chains and disable any
equipment, such as locks, not needed for powered operation. Check that the door is in good
mechanical condition, correctly balanced and opens and closes properly.
4. A-weighted emission sound pressure level of the drive LpA ≤ 70 dB(A).
5. The operator must not be used for doors without a safety catch.
6. Install the actuating member for the manual release at a height less than 1.8 m. If removable,
the actuating member should be stored in direct vicinity of the door.
7. Install any fixed control at a height of at least 1.5 m and within sight of the door but away
from moving parts.
8. Wall switch or wall transmitter must be installed out of the reach of children.
9. Permanently fix the labels warning against entrapment in a prominent place or near any
fixed controls.
10. Permanently fix the label concerning the manual release adjacent to its actuating member.
11. After installation, ensure that the mechanism is properly adjusted and that the drive
reverses or the object can be freed when the door contacts a 40 mm high object placed on the
floor. Ensure that parts of the door do not extend over public footpaths or roads.
12. Refer to pages 4-8 for information on how to adjust the door and drive.
13. Connect the GDO to 220-240V circuit, and fix it to the required place by professional
person.
WARNING: The drive shall be disconnected from its power source during cleaning,
maintenance and when replacing parts.