Victory MATV 48 Скачать руководство пользователя

Страница: 14 / 66

Operator’s Manual Victory MATV Series

- Page 14 of 66 -

Version 2.0

4.3

Personal Protective Equipment

While handling, assembling and maintaining the Heavy-duty Flail mower, adhering to all
recommended safety instructions and ensuring that the correct Personal Protective Equipment
(PPE) is used.

Always wear:

◼

Safety helmet; for head protection and prevention from falling objects.

◼

Safety gloves; for hand protection and prevention of cuts from sharp edges.

◼

Steel-tipped safety boots; for foot protection from falling objects.

◼

Wrap-around safety glasses for eye protection and prevent damage caused by shooting
particles.

◼

Safety vest for recognizable presence, visibility and safety.

◼

Any other Personal Protection Equipment that might be required, specified, or dictated by the
working environment.

◼

Your Company can prescribe additional (safety) instructions. This Manual does not describe
how to comply with this.

4.4

General Safety Rules for Machines

◼

Incorrect practice or lack of care can cause burns, wounds, mutilation, suffocation, bodily
injuries, or death.

◼

Ensure the work area around the equipment is smooth, clean and free from any obstacles.
Keep in mind that a dangerous situation can always arise.

◼

Always wear safety glasses and protective shoes when carrying out the operation.

◼

Long hair is not allowed. Never wear loose or torn clothing. Permanently remove jewelry.

◼

When lifting heavy parts, use a hoist or ask for help, to prevent personal injury.

◼

Ensure that all hoisting equipment such as lifting straps, hooks, or ropes are in a good state of
repair and that they can safely bear the

equipment’s

weight.

◼

Never bypass door interlocks or safety sensors and switches.

◼

Leaking chemicals, oil, gasoline, or water on electrical equipment can result in severe damage
or fire.

◼

Watch for hot parts on switched-off components and hot liquids in lines, pipes, and
compartments to prevent burns.

◼

Never open any vent or drain valve or remove any plugs while the system is under pressure.

◼

Ensure that oil pumps are isolated from the system and relieve the pressure before
disassembling a pump, removing plugs, or disconnecting piping.

◼

Always use tools that are in a good state of repair. Ensure you know how to use the tools
before doing any work.

◼

ONLY use replacement parts from the same brand as the relevant part.

Содержание MATV 48



































































Результаты поиска

Содержание MATV 48

Отзывы:

Похожие инструкции для MATV 48

Бренды по названию

Популярные бренды

Victory MATV 48, Руководство оператора

Результаты поиска

Содержание MATV 48

Отзывы:

Похожие инструкции для MATV 48

Бренды по названию

Популярные бренды