Victory EMHD Series, Руководство оператора

Страница: 46 / 57

Operator’s Manual Victory EMHD Series
- Page 46 of 57 - Version 2.0
8.10.2 Environment
◼
The crossed-out bin symbol on parts, literature, or packaging indicates
that all electrical and electronic equipment, batteries and accumulators
must be disposed of as chemical waste in the European Union. So do
not dispose of these products with regular commercial waste.
◼
To prevent potential harm to the environment or human health from
uncontrolled waste disposal, please submit the products to a separate
waste management organization and promote the sustainable reuse of
materials. Information on different waste collection is available from
your municipal environmental organization.
8.11 List of Consumables
◼
SAE 80/95 Gearbox oil.
◼
Grease; Grade Type II.
9 SPARE PARTS AND WEARING PARTS
As with any mechanical installation, hydraulic installations are also subject to wear and tear.
Keeping a limited number of crucial parts in stock is advisable to avoid costly downtime.
The installation mainly includes unique and complex components that you should always replace
with similar ones, such as controllable pumps and motors, proportional valves, electronic controls,
etc. Order spare parts by referring to the parts list and the hydraulic diagram, if any. When
ordering, always state the correct make, type number and part number.
9.1 Wearing Parts
Wearing parts are parts that usually wear out first. The degree of wear is directly proportional to
the application frequency. Usually, these parts are economically and technically challenging to
repair. Often these are universal purchase parts such as bearings, bushings, etc.
For the reliable operation of a tool, it is essential that wearing parts are of high quality. It is also
helpful that a service organization responds to failure situations and unexpected material needs.
Wear parts are permanently excluded from the warranty.
Wearing parts for the embankment flail mower:
◼
Drive belts set BX17x1270
◼
Flails.