Victory EMHD Series, Руководство оператора

Страница: 36 / 57

Operator’s Manual Victory EMHD Series
- Page 36 of 57 - Version 2.0
5.9 Operating Preparation
◼
Inspect the whole EMHD visually and check all vital components like hoses and their
connections; check hoses, lines and wires for damage, kinking, wear or dirt.
◼
Visually inspect the condition of the hydraulic system.
◼
Check that the working area is relatively smooth and free of obstacles.
◼
Always maintain a full view of the working area during operation.
◼
Keep animals far away from the machine.
5.10 Operating instructions
W A R N I N G S !
•
Assemble the PTO shaft at an angle of no more than 15 DEGREES up or
down (or sideways).
•
Read and understand all instructions before operating the EMHD.
•
Do not allow the tractor engine or Flail mower to bog down or stall.
This causes undue wear and tear on the mower and tractor.
If this continues to happen, reduce ground speed and raise the working
depth of the flail mower.
•
Always stop the tractor engine before removing objects from the rotor
bar.
•
Never travel at a fast ground speed while using the mower; this could
damage the mower.
•
Never attempt to turn the tractor or travel in reverse with the PTO
engaged and the mower in the ground.
•
Always raise the mower out of the ground when backing up or attempting
to turn. Failure to do so may cause damage to the mower.
•
This flail embankment mower is designed to run at 540 PTO rpm only.
5.11 Operation
STEP 1:
◼
Ensure you understand all the information described in Chapter Safety and Maintenance
before assembling and operating the flail mower.
STEP 2:
◼
With the Flail mower positioned on level ground, adjust the tractor lift arms so that the rotor
bar remains parallel to the ground when lifted.