Victesse frontengine Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 21

Victesse frontengine Скачать руководство пользователя страница 3

Congratulations on the purchase of your new Victesse

Thank you and congratulations for choosing a Victesse bike! Victesse bicycles are built with the greatest
care and are only assembled with the best parts. We also offer at-home service, so we feel certain you
will have a wonderful experience with your Victesse bike.

This guide will help you get acquainted with all the features of your Victesse bike and includes tips to
help you keep your bike in perfect condition.

There is one tip we would like to share with you right away, as it has been shown to make e-bikes last
longer: always start off in a low assist mode and low gear (i.e. a gear in which you pedal faster). As your
speed increases, you can shift to a higher gear and higher assist mode. This provides a gentle, gradual
start. You will ride more safely and smoothly, and this minimizes stress on the battery and motor. This
will help to increase the life of your bike.

Happy cycling!

Victesse

English-

2

«
1
2
3
4
5
...
»

Содержание frontengine






















Отзывы:

Нет отзывов