Victaulic FireLock 758-LPA Series Скачать руководство пользователя

Страница: 1 / 23

Series 758-LPA FireLock

™

Actuated System Valve

With Deluge Trim and

Series 776 Low-Pressure Actuator

Installation, Maintenance, and

Testing Manual

Failure to follow instructions and warnings can result in serious injury.

• Always read and understand all installation instructions before attempting assembly of Vic-

taulic piping products.

• Always wear safety glasses and foot protection.

• Failure to do so could result in serious personal injury, property damage, and/or valve

leakage.

If you need additional copies of this manual, or if you have any questions about the safe op-
eration of this valve, contact Victaulic Company, P.O. Box 31, Easton, PA 18044-0031, USA,
Telephone: 001-610-559-3300.

Hang these instructions

in a visible location on the

installed valve for easy

future reference.

DISCONTINUED

PRODUCT

Содержание FireLock 758-LPA Series
























Результаты поиска

Содержание FireLock 758-LPA Series

Отзывы:

Похожие инструкции для FireLock 758-LPA Series

Бренды по названию

Популярные бренды

Victaulic FireLock 758-LPA Series, Инструкция по установке, обслуживанию и испытаниям

Результаты поиска

Содержание FireLock 758-LPA Series

Отзывы:

Похожие инструкции для FireLock 758-LPA Series

Бренды по названию

Популярные бренды