Vicon V5400QS Скачать руководство пользователя страница 3

FCC Notice 

Note: Complies with Federal Communications Commission Rules & Regulations Part 15 for a 

Class B digital device. 

 

WARNING 

T

his equipment generates, uses and can radiate radio frequency energy and if not installed 

and used properly, that is, in strict accordance with the manufacturer’s instruction, may cause 

interference to radio and television communications. It has been type tested and found to 

comply with the limits for a Class B digital device in accordance with the specification part 15 of 

the FCC rules, which are designed to provide reasonable protection against such interference 

in a residential installation. However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause interference to radio and television 

reception, which can be determined by turning equipment off and on, the user is encouraged 

to try and correct the interference by one or more of the following measures: 

 

Reorient the receiving antenna. 

 

Relocate the equipment with respect to the receiver. 

 

Relocate the equipment away from the receiver. 

 

Plug the equipment into a different electrical outlet so that the equipment 

and receiver are on different branch circuits. 

If necessary, the user should consult the dealer or an experienced radio/television technician 

for additional suggestions. 

 

The user may find the following booklet prepared by the Federal Communications Commission 

helpful: 

“Interference Handbook, Bulletin CIB-2” 

This booklet is available from the U.S. Government Printing Office, Superintendent of 

Documents, Mailstop SSOP, Washington, D.C. 20402-9328, ISBN 0-16-045542-1. 

 

Warning: Power must be removed from this unit before removing circuit modules or ribbon 

cables. 

 

Caution: This unit contains circuit cards with integrated circuit devices that can be damaged 

by static discharge. Take all necessary precautions to prevent static discharge 

 

Содержание V5400QS





















Отзывы: