VICON
INSTRUCTIONS FOR
INSTALLATION AND OPERATION
MODEL
ODA-B DISTRIBUTION AMPLIFIER
1. INTRODUCTION
This manual covers the installation, operation, and
maintenance of the Model
Distribution Am-
plifier. This unit should be installed by a qualified
technician using approved materials and wiring prac-
tices in accordance with national, state, and local wiring
codes. Read these instruction through completely before
attempting installation.
The
Distribution Amplifier provides a
maximum of six video outputs each equal to the single
video input to be used for operation of other video
equipment. Circuitry with individual and isolated com-
plementary transistor pairs provides power for several
loads, Refer to Figure 1.
Characteristics include AC coupling (for operation with
both AC- and DC-coupled cameras), color compatibil-
ity, and a broad frequency response. The
is
available in two input voltage configurations, 120 VAC
and 230 VAC (Model
The term
is used throughout this manual to refer to
both models unless specifically stated otherwise.
Model
is housed in a sturdy, heavy-gauge
steel chassis protected by a steel cover finished in gray
textured enamel.
VICON
POWER
Legend
1
CAMERA video
input
2
V i d e o o u t p u t s , 1-6
3
Power cord
4 POWER push button
5
Power LED
FRONT PANEL
Figure 1
Front and Rear Panels
WARNING: TO PREVENT RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Product specifications subject to change without notice.
part number 8006-8671-02-00
VICON INDUSTRIES INC.
89 ARKAY DRIVE, HAUPPAUGE,
N.Y. 11788
l
TEL:
l
FAX:
(2288)
TOLL FREE:
l-800-645-91
16 . UK:
. INFOFAX:
1-800-287-l
207