VICON
INSTRUCTIONS FOR
INSTALLATION AND OPERATION
MODEL
MEDIUM-DUTY OUTDOOR WALL MOUNT
INTRODUCTION
The information in this instruction manual covers the
installation of Model
Medium-Duty
door Wall Mount. This unit should only be installed by
a qualified technician using approved materials in
cordance with national, state and local codes. Read these
instructions completely before attempting installation.
The
Medium-Duty Outdoor Wall Mount is
designed to support camera stations weighing up to a
total of 40 pounds (18 kg), including pan-and-tilt or
scanner, camera/lens system, and housing. It is con-
of die-cast aluminum alloy with a gray
semigloss enamel finish. This wall mount accepts an
optional adjustable head, Model
and a vari-
ety of pan-and-tilt drives and scanners.
2. INSTALLATION
2.1 Unpacking and Inspection
All Vicon equipment is tested and inspected before
leaving the factory. It is the carrier’s responsibility to
deliver the equipment in the same condition as it left the
factory.
2.1.1 INSPECTION FOR VISIBLE DAMAGE
Immediately inspect the cartons upon delivery. Make a
note of any visible damage on all copies of the carrier’s
freight bill.
Make sure the carrier’s agent (the person making the
delivery) signs the note on all copies of the bill. If the agent
does not have claim forms, contact the carrier’s office.
2.1.2 INSPECTION FOR CONCEALED
DAMAGE
As soon as possible after delivery, unpack the unit and
inspect it for concealed damage. Do not discard the carton
or packing materials. If the unit is damaged, contact the
carrier immediately and request forms for filing a damage
claim. Make arrangements for a representative of the
carrier to inspect the damaged equipment.
If the equipment must be returned for repair, follow the
Shipping Instructions at the end of this manual.
Product specifications
subject
to change without notice.
Vicon part number 8006-8457-03-00
INDUSTRIES
INC. 89 ARKAY DRIVE, HAUPPAUGE, N.Y. 11788
. TEL:
(2288)
l
FAX:
516-951 -CCTV (2288)
TOLL FREE:
l-800-645-91 16
. UK:
l
INFOFAX: -800-287-l 207
