Introduction
The information in this manual covers the installation, operation, and maintenance of the Roughneck® V920D
Impact-Resistant Dome Cameras. These units should only be installed by a qualified technician using common
hand tools and approved materials and wiring methods in accordance with the national Electrical Code
ANSI/NFPA 70, state and local wiring codes. All interconnecting equipment or accessories must be UL listed.
Any mention in this manual of alarm inputs/outputs have not been evaluated by UL to be used for burglar
alarm functionality. When installing this equipment, use only a UL Listed Class 2 indoor/dry or Class 3
outdoor/wet rated power supply. Read this manual through completely before attempting installation.
The Roughneck V920D Impact-Resistant Dome Camera offers high-security cameras in a compact domed
housing. They are for indoor/outdoor applications and have permanent mold construction and a high-impact
polycarbonate plastic dome. These camera packages are designed to handle the toughest environments,
including correctional facilities, warehouses and loading docks. They include
“O”-ring sealing and a heater
(requires 24 VAC) to allow operation in low temperature and in all weather conditions. Tamper-resistant
screws make the units resistant to vandalism.
The base of the unit screws directly to a wall or ceiling. The camera mounting brackets offer adjustment to
any view required. The camera position is adjustable horizontally and vertically. The V920D series has an
integral high-resolution color or day/night camera with a 2.8-12 mm varifocal autoiris lens. The varifocal lens
allows for lens adjustment capability and autoiris adjustment. The camera accepts 24 VAC.
The Roughneck V920D Dome Camera series meets FCC requirements for a Class A device.
Introduction 7
