Vicon KollectorLite XG, Руководство пользователя программного обеспечения

Страница: 261 / 282

XX185-30 Rev 807 Kollector Lite Configuring the Personal Firewall
•
253
Appendix A
Configuring the Personal Firewall
Due to various security risks, Vicon has decided to keep only specific ViconNet application ports open, while
fully closing and protecting all others. To do this, Microsoft's Personal Firewall feature, which exists in every
Windows XP operating system, is used.
The following table lists all ports per protocol used by the ViconNet application, version 4. All other ports
should be kept closed in order to protect the system from future security breaches. If other ports are open
from an earlier version of ViconNet, they will be closed automatically, to match the list of required open ports,
as shown below.
Open Ports Closed Ports
TCP: 4354, 4355, 4356, 4357, 4358, 4359 All other Windows ports
UDP: 4354, 4355, 4356, 4357, 4358, 4359 All other Windows ports
NOTE: The Personal Firewall feature is configured by default in Vicon’s XP Embedded revisions higher
than D.
Vicon recommends using the Microsoft Personal Firewall feature, especially in the following cases:
•
The Kollector Lite is connected directly to the Internet.
•
The Kollector Lite is connected indirectly through a network that has at least one computer connected to
the Internet.
To configure the firewall:
1. Open Windows Explorer by right-clicking the Start button and selecting Explore .
2. Double-click My Computer in the left pane, and then double-click Control Panel in the right pane.
3. Click Network and Internet Connections , and then click Network Connections .
4. Double-click Local Area Connection . The Local Area Connection Status window appears.
5. Click the Properties button. The Local Area Connection Properties window appears.