manualshive.com logo in svg

Vicon KollectorLite XG, Руководство пользователя программного обеспечения

Поделиться
Скачать
Vicon KollectorLite XG Скачать руководство пользователя страница 163

XX185-30 Rev 807 Kollector Lite 

Configuring the ViconNet System 

•

 155 

Restoring and Backing Up System Settings 

The ViconNet system automatically backs up all the system settings every time you close the ViconNet 
application. 

In addition, you can manually back up the system settings at any time, to any network location, or restore 
the settings to ones that were saved previously. 

To manually back up or restore system settings: 

1.  From the ViconNet 

Main

 window, click 

. The 

Setup Site Selection

 window is displayed, as 

shown on page 57. 

2.  Select your Kollector Lite and click 

. The 

System Settings 

window is displayed, as shown on 

page 

1

58. 

3.  To back up settings, click 

. A standard file browser window is displayed. Navigate to the 

required backup location and click 

OK

. It is highly recommended that you backup the settings to a 

floppy disk in the A:\ drive, CD or a USB drive, in case the hard drive fails. After you have saved the 
settings to the floppy disk or CD, label it with the name of the file and the date on which it was created. 

4.  To restore settings, click 

. The following message is displayed, warning you that restoring 

previous settings will override your current settings. 

 

5.  To continue, click 

Yes

 A standard file browser window is displayed. Navigate to the backup file that you 

want to restore and click 

OK

. 

NOTE:  

Remember the backup location for restoration purposes. It is important to restore system settings 
on the same transmitter on which the backup was performed. 

Содержание KollectorLite XG



























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды