manualshive.com logo in svg

Vicon KollectorLite XG, Руководство пользователя программного обеспечения

Поделиться
Скачать
Vicon KollectorLite XG Скачать руководство пользователя страница 14

6 

•

 Introducing ViconNet 

XX128-34 Rev 607 Kollector Pro Network Digital Video Recorder 

ViconNet Products 

ViconNet’s environment is comprised of one or more sites (systems) connected by a network. The various 
ViconNet site types available are described below: 

• 

Digital Video Recorder (DVR):

 The Kollector Elite, Kollector Pro and Kollector Lite, each of which has up 

to 16 camera and microphone inputs. (The hybrid Kollector Elite supports audio input as standard and it is 
available as an option in the Kollector Lite). DVRs, which are managed by ViconNet applications, can 
perform local and remote video recording, local and remote video playback and can archive video/audio 
data to any suitable SCSI-connected RAID device. 

• 

Workstation:

 The VN-NVR Workstation or the ViconNet software loaded onto a computer meeting the 

defined minimum hardware and software requirements. Workstations can remote-view live and playback 
video from networked Recorders, Servers and other Workstations. In addition, Workstations can handle 
alarms sent from ViconNet Recorders and Servers. 

• 

IP Camera/Server:

 A family of video cameras and servers that convert analog video into digital for use 

with the ViconNet system.  

• 

Virtual Matrix Controller (VMC):

 The Virtual Matrix Controller (VMC) is software loaded onto a 

preconfigured computer meeting the defined minimum hardware and software requirements. The VMC 
can remote-view live and playback video networked Recorders, Servers and Workstations. Unlike the 
VN-NVR, all video output is sent via the network to decoders (KRX-3), which adjust and transfer the video 
to remote display monitors. 

• 

KRX-3 Decoder:

 A video decoder used with the Virtual Matrix (VMC) that can control and handle up 

to three analog remote monitors, in composite, S-Video and VGA formats. 

• 

Keypad:

 A keypad used with the VMC for selecting, using the devices secondary ID, which video 

should be displayed on which monitors. For more details about the device secondary ID, refer to the

 

Defining Device Groups and Group Sets 

section

 in Chapter 3

,

 Configuring the ViconNet System

. 

Содержание KollectorLite XG



























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды