Vicon KOLLECTOR PRO XG **128-33-00, Руководство пользователя программного обеспечения, Страница: 50 / 263

42
•
Getting to Know ViconNet XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder
Date/Time Controls
The From and To Date/Time controls in the top-left and top-right of the window enable you
to specify an exact start ( From ) and end ( To ) date and time for the recorded segment(s) that you want to view
and play back in the Recorded Device Contents area.
This alternate time interval selection method (used instead of the time interval tabs) lets you fine-tune the time
interval period. Using the time interval controls, you can select a specific:
•
Date range by selecting To and From dates for the recorded segment(s) you want to view (using a popup
calendar).
•
Time range (hour, minutes and seconds) for the recorded segment(s) you want to view by specifying the
required start and end time.
After you select a date range and/or time range, you must click the View In button to implement the selection.
The Time Interval Map area is automatically updated according to the dates and times specified, as
described below. In addition, all the video segments recorded during the date and time range are displayed,
as described in
Recorded Device Contents Area , page 40.
NOTE: The time interval controls are used in the Selecting Payback Time Interval procedure in Chapter 6,
Playing Back Recorded Video.
Time Interval Map Area
The Time Interval Map area displays a graph with the current range of time specified by the selected time
interval tab or controls, as follows:
When you modify the time interval, as described in Time Interval Tabs , page 41, or Time Interval Controls ,
above, the Time Interval Map area automatically changes and reflects the new time interval.