Vicon KOLLECTOR PRO XG **128-33-00, Руководство пользователя программного обеспечения

Страница: 150 / 263

142
•
Configuring the ViconNet System XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder
Restoring and Backing Up System Settings
The ViconNet system automatically backs up all the system settings every time you close the ViconNet
application.
In addition, you can also manually back up the system settings at any time, to any network location, or
restore the settings to ones that were saved previously.
To manually back up or restore system settings:
1. From the ViconNet Main window, click . The Setup Site Selection window is displayed, as
shown on page 57.
2. Select your Kollector Pro and click . The System Settings window is displayed, as shown on
page
1
58.
3. To back up settings, click . A standard file browser window is displayed. Navigate to the
required backup location and click OK . It is highly recommended that you backup the settings to a
floppy disk in the A:\ drive or CD, in case the hard drive fails. After you have saved the settings to the
floppy disk or CD, label it with the name of the file and the date on which it was created.
4. To restore settings, click . A standard file browser window is displayed. Navigate to the
backup file that you want to restore and click OK .
NOTE: Remember the backup location for restoration purposes. It is important to restore system settings on
the same transmitter on which the backup was performed.