Vibration Research Corporation VibrationVIEW, Руководство пользователя, Страница: 53 / 333

How To ... 40
© 1995-2005 Vibration Research Corporation. All rights reserved.
2. Load the desired test, or Define a new test .
3. Click the " Settings " button on the Toolbar
4. Click the "Import from WAV file" button in the Field Data Replicator Playback dialog box.
5. Select your file and press "Open"
6. Select your Output file and press "Save" (the recommended directory is C:\Program
Files\
VibrationVIEW 4\Drive)
7. You will be taken back to the Field Data Replicator Playback dialog box and the new wave form will
be loaded and listed in the Playback file location.
8. Click the "OK" button to close the Settings dialog box and save the test to the hard drive under the
current test profile name. If you wish to save the profile under a different name, click the Save As
button and choose a new profile name.
2.6.6 How to export a waveform to a Windows .WAV file
How to export a Field Data Replicator waveform to a Windows .WAV file
To convert from FDR to WAV, use the following procedure:
1. Change to the Field Data Replicator test mode by selecting the
Test..Test Type..Field Data Replicator menu command.
2. Load the desired test
3. Click the " Settings " button on the Toolbar
4. Click the "Edit Playback File" button. If the optional Adobe Audition software package was
purchased, Audition will open and load the current waveform.
5. Select File.. Save As from Audition menu.
6. Set Files of Type to "ACM Waveform (*.wav).
7. Select your Output file, and click "Save" button.
2.7 How to integrate VibrationVIEW into remote applications
2.7.1 How to use Remote Inputs to control VibrationVIEW
How to use Remote Inputs/Outputs to control VibrationVIEW
This tab is accessed by selecting the Configuration..Remote Inputs menu command.
110 109
110 293
189
109
110
110 293
96