Vibration Research Corporation VibrationVIEW, Руководство пользователя, Страница: 300 / 333

VibrationVIEW Help 287
© 1995-2005 Vibration Research Corporation. All rights reserved.
Use this dialog box to build a schedule of tests to run in sequence. The tests will be run in the listed
order, with each test running for the duration specified within the individual test's schedule. There will
be a pause of approximately 5 seconds between each test.
The schedule will be aborted if a test is shut down prior to completion of the schedule. (For example, if
the operator presses the "Stop" button, or a test encounters an error condition.)
Click the "Run Schedule" button to run all tests beginning with the first test. If you want to start the
schedule at a specific test, first select that test, then click the "Run Schedule" button.
To add programs to the test schedule, select the test you want the new test to follow and click the "Add
Test" button. You will be prompted for a test name. When you click the "Open" button, that test will be
added to the schedule.
To remove programs from the test schedule, select the test you want to remove and click the "Remove
Test" button. Click the "Remove All" button to clear all entries in the list.
To repeat a sequence of tests multiple times, select the last test you want in the repeat sequence, and
then click the "Add Loop" button. A
Schedule Loop dialog box will appear prompting you for the
first test in the sequence and the number of times you want the sequence performed.
To change the settings of an existing loop, select the loop level in the schedule and click the "Add
Loop" button.
Test schedules may be saved on the hard disk by clicking the "Save Schedule..." button and later
loaded back in by clicking the "Load Schedule..." button.
9.8.26 VibrationVIEW Test Type dialog box
VibrationVIEW Test Type dialog box
286