
SNT4, Rev 03/21/2022
Copyright © 2022 Vibrant Yard Company LLC, Wichita, Kansas, USA. All rights reserved. Page
3
of
10
1.
INTRODUCTION
Congratulations on your purchase of the Step ’N Tilt
®
Lawn Aerator. We are confident that you will be amazed by its
capabilities. For your safety, please read and understand all installation and operating procedures in this manual before
attempting to install and use your Step ’N Tilt
®
. It is designed for operators weighing at least 80 lb and up to 6 feet, 6
inches tall.
In addition to lawn aeration, your Step ’N Tilt
®
is also a very capable 60 lb capacity hand truck.
WARNING:
The use of Step ’N Tilt
®
involves physical activity similar to climbing stairs and requires a sense of balance.
Do not use if you are unable to climb stairs without holding onto a handrail. Although moderate physical activity such as
using the Step ’N Tilt
®
is safe for most people, health experts suggest that you talk to your doctor before you start a new
physical activity or an exercise program. Do not use on slopes where you might lose traction, slip, or fall.
2.
INSTALLATION
Note: Please use metric size wrenches or adjustable wrenches.
Step 1: Install the wheels to the baseplate. Two bolts and two
nuts are required for each wheel. Use a 14mm wrench to hold
the nut and a 12mm wrench to tighten the hex head bolt.
Nut (14mm wrench)
hex head bolt
(12mm wrench)
baseplate
Check to make sure the
bolts and locknuts are tight