TECHNICAL SPECIFICATIONS
Warm
Design by Ramos & Bassols
ASSEMBLY INSTRUCTIONS
4900
4901
4905
4906
1
Short screw
1 un.
1 un.
1 un.
1 un.
2
Spotlight assembly
1 un.
1 un.
1 un.
1 un.
1.
2.
SUPPLIED MATERIAL
4900 - 4901
4905 - 4906
4900-INC.
Net Weight 3,8 Kg
3 x E-26 Med. Base 120V 40W Max.
4900-CFE.
Net Weight 3,8 Kg
1 x GU24 C.F. 120V 13W.
4901-INC.
Net Weight 4,3 Kg
3 x E-26 Med. Base 120V 40W Max.
4901-CFE.
Net Weight 4,3 Kg
1 x GU24 C.F. 120V 13W.
4905-INC.
Net Weight 4,1 Kg
3 x E-26 Med. Base 120V 40W Max.
4905-CFE.
Net Weight 4,1 Kg
1 x GU24 C.F. 120V 13W.
4906-INC.
Net Weight 4,6 Kg
3 x E-26 Med. Base 120V 40W Max.
4906-CFE.
Net Weight 4,6 Kg
1 x GU24 C.F. 120V 13W.
Class I. Product with an additional
protection cable (grounds).
Product protected against solid
object as big as or bigger than
12 mm. No protection against
water.
Product that CAN be in contact with
normally-flammable materials (wood
or others).
Caution
Before assembling and installing this product, carefully read the following:
-Always use the recommended bulb
-Never use a bulb with a wattage exceeeding the recommended one. Always use a bulb with the recommended wattage or lower.
-If the steel cable or the power cord of this lamp is damaged, it must be replaced only by the manufacturer or their technical service or by a person capacitated to this effect
to avoid any risk.
-This lamp is for indoor use only, excluding bathrooms or any type of humid surface.
-We recommend reading the manual before installaing the lamp. Keep this instructions for future reference.
