Viavi Xgig Maestro, Руководство по введению

Страница: 37 / 42

Chapter 2 Using the Port Selection and Domain Setup Window
Using Other Controls on the Window
Xgig Maestro Introduction Guide
November 2015 Version 8.1 Page 25
Using Other Controls on the Window
The Port Selection and Domain Setup window has additional controls on the window that
let you flash the port LEDs on a blade, refresh the display, close the window, shut down
sync group and upgrade chassis. This section describes these controls.
Controlling LEDs on the Ports
The Port Selection and Domain Setup window has buttons at the bottom that let you flash
the port LEDs on a blade. This can help you identify blades in your Xgig chassis.
To flash the LEDs:
1 Select the ports you want.
2 Click
Blink
to start the LEDs flashing.
The four LEDs on the port blink green.
3 Click
Stop
to end the blinking.
The LEDs automatically stop blinking after 40 seconds, if you do not click
Stop
.
Updating the Display
To update the display of the information presented in the Port Selection and Domain Setup
window, click
Refresh.
This can be useful if another user is making changes to ports at the same time.
Closing the Window
To exit the Port Selection and Domain Setup window, click
Close
.
Shutting Down a Sync Group
To shut down a sync group:
1 Position the cursor over the sync group you want to shut down.
2 Select
Shutdown Sync Group
from the Context Menu.