Viavi WiFi Advisor WFED-300AC, Руководство пользователя

Страница: 50 / 78

Chapter 3 Testing
Assessing WiFi performance throughout a site
WiFi Advisor Wireless LAN Analyzer User’s Guide
Page 38 22073751, Rev. 003 September 2015
Step 1: Selecting devices
The first setting to specify is selecting which device is the access point and which is the station.
To select devices
1 From the Site Assessment page, select Devices .
All registered devices are shown.
If not shown, you may need to pair with the device and then register it. See
“Connecting a WiFi Advisor for the first time” on
page 13 and “Registering and unregistering devices” on page 14 .
2 Specify which device will function as the wireless access point (AP). This can be a WiFi Advisor or the customer’s AP.
–
WiFi Advisor as AP - the WiFi Advisor acts as the access point. This is typically performed before or during installa-
tion.
– Through Customer AP - the WiFi Advisor is connected to the access point over Ethernet. This is typically trouble-
shooting after installation.
If “Customer Access Point” is selected, the “WiFi Network” appears in the Settings pane.
a Choose the WiFi network to test.
b Enter the password for that network.
A Site Assessment-capable Viavi device (such as a second WiFi Advisor) should then be connected to the Ethernet port of
the Access Point.
3 Specify which device will function as a Station.
The Access Point device generally stays in one location (the desired location for the actual Access Point / Residential Gateway)
and the Station device typically travels from test location to test location.