Viavi T-BERD MTS 5800, Руководство по началу работы

Страница: 85 / 296

Chapter 3 Getting Started
Launching the MSAM or CSAM
T-BERD/MTS/SC Getting Started Guide
March 2018 22046537, Rev. 016 Page 61
When multiple BERT icons are available, a yellow icon indicates which module is
active; a green outline surrounding a yellow icon indicates that the instrument is
currently providing the user interface
for that particular module (in other words, it is the
module in focus).
About the Jitter icon
If your instrument is configured and optioned for optical jitter/wander testing, before
launching the module, consider the following:
• Connect the AC power adapter to the power mains before launching the optical
jitter/wander function (see “Powering the instrument” on page 56 ).
• Turning on the JITTER icon also automatically turns on the BERT function.
• To conserve power, if you are no longer testing optical jitter or wander, turn off the
JITTER icon. All other “BERT” functions will still be available.
Turning the BERT icon ON
To turn a BERT icon ON
1 Press the ON/OFF button.
The unit loads the 8000 Base Unit or 6000A Base Unit software, and then the
following occurs:
–
The screen goes blank for a few seconds.
– The Presentation page for the base unit appears.
– If the Transport Module, MSAM, or CSAM was launched during your last test
session (when you turned the power OFF), the Viavi BERT MODULES
STARTUP screen appears, indicating the progress of the software load.
When the load reaches 100%, the Main screen appears. The
Transport Module, MSAM, or CSAM is launched; proceed to
step 3 .
– If the Transport Module, MSAM, or CSAM was not launched during your last
test session (when you turned the power OFF), the Viavi BERT MODULES
STARTUP screen appears, instructing you to press the SYSTEM/HOME
button. Proceed to
step 2 .
2 Press the SYSTEM/HOME button.
The System screen appears. The MSAM or CSAM is represented by a BERT
icon.
3 If the icon for the function you want to launch is not already outlined in green,
select the icon by doing one of the following:
–
Use the touch screen to select the icon.
– Use the arrow key to select the icon.
The icon is highlighted in green when selected.