manualshive.com logo in svg

Viavi T-BERD MTS 5800, Руководство по началу работы

Поделиться
Скачать
Viavi T-BERD MTS 5800 Скачать руководство пользователя страница 168

Chapter 5  

Smart Access Anywhere

About Smart Access Anywhere

T-BERD/MTS/SC Getting Started Guide

Page 144

22046537, Rev. 016

March 2018

About Smart Access Anywhere

Smart Access Anywhere allows you to view and control the instrument’s user interface 
from a remote location using a workstation. In addition to configuring the instrument and 
performing tests, you can transfer files to and from the instrument using the instru-
ment’s file manager utility. You can also rename and delete files, or create, rename, and 
delete directories.

Licensing

If you are using the Smart Access Anywhere utility to remotely access a 5800/4800 test 
instrument, you do not need a license. If you want to remotely access any other instru-
ment (for example, a CSAM or MSAM), you must specify a license key before using the 
utility.

The following licenses are available:

•

License 1 (reference 

SAA-6K-L1

): for Smart Access Anywhere using an Ethernet 

or Wifi hotspot connection.

•

License 2 (reference 

SAA-6K-L2

): for Smart Access Anywhere using an Ethernet, 

Wifi hotspot, or USB / Wifi connection via a 3G smart phone.

Downloading and extracting the utility

The 

Smart Access Anywhere

 

utility must be downloaded and extracted on the work-

station that you intend to use to connect remotely to the test instrument.

To download the utility

1

On your workstation, open a browser and type the following address:

http://smartaccess.updatemyunit.net

2

Click on the 

SmartAccessAnywhere_Vxx.xx.xx.zip

 link.

3

Select 

Save

 

in the dialog box.

After the download is complete, the browser can be closed.

4

Go to the download directory, then extract the files in the zip file into the desired 
destination directory.

The utility is downloaded and extracted.

NOTE:

You do not need administrator privileges to install the utility on your worksta-
tion. The utility will be downloaded as a zip file.

Содержание T-BERD MTS 5800









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды