Viavi SmartOTDR 100, Руководство пользователя, Страница: 79 / 156

Chapter 7 Connectivity
Establishing connection
User Manual 7SMART102 Rev002 61
a Click on Start > Control Panel .
b Double click on Network Connection .
c Double click on Local Area Connection .
d In the dialog box, click on Properties .
e Check the parameter Internet Protocol (TCP/IP) is selected
( ) and click once on it (underlined in blue)
f Click on Properties button.
g On the tab General , check the parameter Obtain an IP address
automatically is selected ( ); if not, click to select it.
h Click on Ok and close all the dialog boxes opened onto the PC.
Configuring the
SmartOTDR via
Ethernet
1 In the Home page, validate the Connectivity icon.
2 In the connectivity page, validate the Ethernet icon
3 In the I/O Interfaces box, configure the following parameters:
Remote Screen
Remote screen = Session or Permanent must be confirmed in both
cases, in the Interface E/S window .
No the screen cannot be remote on to a PC
or on to another SmartOTDR.
Session Mode the Remote screen function is inactive
once the SmartOTDR is switched off.
Permanent Mode the Remote screen function is still active
when the SmartOTDR is switched off and
restarted.
Permanent with password same function as the Permanent mode,
with an access to the equipment via VNC
protected by a password:
42000
Fig. 40 Internet Protocol