Viavi SmartOTDR 100, Руководство пользователя, Страница: 62 / 156

Chapter 6 Scope
Launching a test of the connector and fiber end-face
44 User Manual 7SMART102 Rev002
Freeze mode
Once the image is acceptable, you may freeze the picture. This feature
allows to store in memory the resulting picture.
High Mag. / Low
Mag.
The High Mag./Low Mag. menu key allows to switch the display from
High to Low magnification and vice-versa.
This function is also available pressing the button directly on the P5000i
(see
Figure 19 on page 38 ).
Live mode
If you are in Freeze mode, or in Mosaic mode, with a picture selected
(see “Mosaic Mode” on page 59), press
Live menu key to return to live
camera picture.
Launching a test of the connector and fiber end-face
Launching a
test of the
connector and
fiber end-face
Once the display is correctly adjusted (magnification, sharpness...), a
test of fiber connector can be launched.
To launch the test:
1 Press Test key to launch the test of plugged fiber connector.
The test is completed:
–
once the Led Testing is no more lit in red
– once the icon is no more displayed on the upper banner
– once a screen as the following one displays:
Freezing a scope result does not store the picture in a file (see
“File menu” on page 48 ). The result will be lost if the instrument
is shut off, or if more than 3 pictures are frozen (see “Mosaic
Mode” on page 46 )
NOTE
The button set on the lead, or the QuickCapture™ on the P5000i
allows to freeze the picture or to take a snapshot.
Use the focus control to adjust the focus of the image
NOTE
To configure Pass/Fail criteria, see "Configuring the Scope" page 39 .