Viavi SmartOTDR 100, Руководство пользователя, Страница: 59 / 156

Chapter 6 Scope
Configuring the P5000i Scope
User Manual 7SMART102 Rev002 41
Increment ; the fiber number is automatically incremented at each
results saving
Decrement : the fiber number is automatically decremented at each
results saving.
Cable Id This parameter allows to enter an identification of
the cable, using the Edition menu.
Direction The direction shows if the acquisition has been
made from the origin to the extremity (A->B) or
from the extremity to the origin (B->A). Changing
direction makes it possible, when different
extremities are handled, to see the parameters of
the fiber for the other extremity.
Location A The name of the Location A of the link may be
entered.
Location B The name of the Location B of the link may be
entered.
Company Enter the name of the company carrying out the
test.
Technician Id Enter the name of the operator carrying out the
test.
Job Id This line is used to enter a description of the job
in progress.
File
The File box allows to configure the saving of scope results.
Dir The Dir parameter is displayed in grey, and
indicates the directory into which the results will
be saved. To change the directory, press
F
ILE
hardkey and select another directory from the file
Explorer page; then press S
ETUP
hard key to
return to Scope Setup page.
Filenaming Use the edition keypad, which will display by
clicking on the right arrow key, to enter a specific
name for the file. You can enter manually a name
and/or use pre-defined parameters (Fiber Id,
Cable Id, Locations...).
NOTE
All parameters of the Link Description box will appear in the pdf report
or jpg file generated from a test results page.