Viavi SmartOTDR 100, Руководство пользователя, Страница: 32 / 156

Chapter 3 Starting up
Charging the battery
14 User Manual 7SMART102 Rev002
When the Charge indicator is blinking red, this mean the power supply is
not compatible with the battery used. Charge is disabled.
Li-Polymer
Battery
charging time
If the battery is completely discharged, the time taken to recharge is:
– approximately 5 hours, if the apparatus is not in use ( Charge indi-
cator solid red)
– about 10.5 hours if the instrument is used during charging ( On indi-
cator lit in fix green, Charge indicator lit in solid red).
Battery charge
level display
When the battery is installed in the instrument, a battery icon is displayed
in the top right-hand corner of the screen. Example:
.
It is essential to wait until charging is complete to ensure
maximum independent operating time, which may otherwise be
considerably reduced.
This icon is displayed exclusively when a Li-Polymer battery is
installed into the equipment.
If a AA Dry Battery Pack is installed, then the icon displayed on the
upper banner is
, without charge level indication.
Table 8 Battery icons
The battery capacity is superior to 75%
The battery capacity is set between 50% and 75%
The battery capacity is set between 25% and 50%
The battery capacity is inferior to 25%
The battery capacity is unknown. Perform a full charge/
discharge of the battery to get back to a valid indication.
This icon may appear if battery is changed or if the bat-
tery auto discharges at a very low level (example: if a
Platform switches off as battery is empty, and the charge
is not done during several months (= auto discharge)).