Viavi SmartOTDR 100, Руководство пользователя, Страница: 31 / 156

Chapter 3 Starting up
Charging the battery
User Manual 7SMART102 Rev002 13
Charging the battery
Connecting the
mains adapter
1 Set the appropriate adaptable plug to the power supply cable,
according to your country (see
page 12 ).
2 At the right side of the SmartOTDR, lift up the power supply socket
protector and plug in the mains adapter.
3 Connect the adapter to the mains.
The
On indicator lamp starts to blink in green.
First use of the
battery
At the delivery, the battery is already set into the equipment, but its
charge level is not «recognized» by the equipment.
Using a Li-Polymer battery, the icon is displayed on the upper
banner of the screen.
To get a valid indication of the battery, and be able to use correctly the
Platform:
1 Charge fully the battery
2 Once fully charged, discharge the battery by keeping the Platform
switched on, but not plugged to mains.
3 The battery can then be charged, and the Platform used simultane-
ously.
Charging the Li-
Polymer battery
On connection to the mains:
– if the user does not press
O
N
, the battery will start the charge. In this
case, the Charge indicator will be lit in red.
– when the user presses the
O
N
key, the instrument starts up and the
battery will charge during use ( Charge indicator in solid red).
Once the battery is fully charged, the Charge indicator is lit in solid green.
Use only the mains adapter supplied with the SmartOTDR. The
adapter for some other electronic device may appear to be
identical, but entails a risk of damage to the SmartOTDR.
NOTE
If a AA Dry Battery pack is used, fully charge the batteries before set-
ting the pack into the SmartOTDR.