Viavi SmartOTDR 100, Руководство пользователя, Страница: 147 / 156

Chapter 11 Maintenance and Troubleshooting
Troubleshooting
User Manual 7SMART102 Rev002 129
Erase disk
To delete all the disk contents of the SmartOTDR:
1 On the Home page, press the Settings icon to open the System
Settings page
2 Press Expert Tools > Media Utilities ,
3 Select Disk Erase to delete all the disk contents into the Smar-
tOTDR.
A confirmation must be validated before the deletion.
4 Enter the password
02468753
and press Enter to start disk
erasing.
Changing the
battery
If you meet problems during the Platform functioning, or if the battery
does not charge anymore when plugged, this may require the battery to
be replaced.
Accessing to the
damaged battery
To access the battery of the SmartOTDR, proceed as follows:
1 Switch off the instrument and disconnect the mains supply.
2 Turn the instrument face down on the work surface.
3 Remove the battery door
4 Pull the battery connector from its housing, to disconnect it from the
base, taking care not to damage the connector into which it is
plugged.
CAUTION
Battery is not interchangeable in the field. It must be replaced
exclusively for maintenance purpose.
Fig. 91 Battery installation
Battery door
Battery