Viavi SmartOTDR 100, Руководство пользователя, Страница: 138 / 156

Chapter 11 Maintenance and Troubleshooting
Maintenance procedure
120 User Manual 7SMART102 Rev002
13 Click on Continue .
The list of the software versions available on the PC is displayed
next to the versions installed on the SmartOTDR (see
Figure 83 on
page 119 ).
Installation from a
USB memory stick
You must be equipped with a USB memory stick with a minimum
capacity of 128 Mo.
Before installing the upgrade, you must format the USB memory stick
(see
“Formatting the USB memory stick onto the SmartOTDR” on
page 128 ).
1 Once formatted, disconnect the USB memory stick from the Smar-
tOTDR using the key
Eject USB in the Media Utilities page.
2 Connect the USB memory stick to the PC
3 Unzip the upgrade files on the PC and transfer it to the USB memory
stick:
a Download and save on your PC the.exe upgrade file that you
can get from the web (
http:// updatemyunit.net see “Down-
loading from Internet” on page 117 ).
b Once the transfer is completed, double click on the.exe file: A
window will appear. Check that the folder is correct i.e. the USB
memory stick driver is appearing in the line at the bottom of the
dialog box then press OK. If not, click on the icon
in order to
select the right USB drive.
c Press OK and wait for the end of loading.
4 Then remove the USB memory stick, using the appropriate proce-
dure, from your PC
As for any media formatting, please note that all data present on the
USB memory stick will be irremediably lost.
Fig. 84 List of software update