Viavi SmartOTDR 100, Руководство пользователя, Страница: 63 / 156

Chapter 6 Scope
Launching a test of the connector and fiber end-face
User Manual 7SMART102 Rev002 45
A summary of test results is displayed on the right, upper part of the
screen.
– Zone A: Core zone: it is the area
surrounding the core
– Zone B: Cladding zone. It surrounds the
majority of the fiber cladding.
– Zone C: Epoxy ring.
– Zone D: Ferrule/Contact zone: it identi-
fies a portion of the ferrule near and
around the fiber
Overlay
The Overlay key allows, when selected, to display the limits of each zone
and to display with colors the defaults on the image.
When the key is deselected, the zones and defaults are not graphically
identified.
This function is also available in Mosaic Mode (see “Mosaic Mode” on
page 46 ).
Fig. 24 Test results
Test result in
High mag.
Profile selected
in the Setup page
Summary of
Test results
Zone C
Zone B
Zone A
Zone D
NOTE
To return to a Live Camera image, press the Camera key; or press
the Full Screen/Mosaic key view both the live image and a test result
simultaneously.
In Mosaic mode (see "Mosaic Mode" page 46 ), the result of the test
only displays Pass or Fail information; the status of each zone is dis-
played only in full screen mode.