Viavi SmartOTDR 100, Руководство пользователя, Страница: 60 / 156

Chapter 6 Scope
Configuring the P5000i Scope
42 User Manual 7SMART102 Rev002
The line below Filenaming shows the name of the file according to the
parameters entered.
Logo Click on right arrow key and select in the
Explorer a JPG file which will represent the Logo
displayed on the upper left part of the report
Save mode Select if the test results must be saved only in an
Image , only in a pdf Report or in an image + a
pdf report ( Image + Report ).
Auto Store Select Yes if the saving must be done
automatically after a test, or No if the saving
must not be done automatically.
Adding a new
profile
Once the Setup screen of the scope is displayed, you can add a specific
profile which will be used for the test.
The profile must be created via FiberChek2TM, and stored on one
storage media of the SmartOTDR (disk, or USB memory stick).
1 On the Setup screen, select Profile and press Add key.
2 On the explorer, select the file which will be used as profile (icon
; extension: .PRO)
3 Press Load .
Once loaded, the display goes back automatically to Setup screen.
4 Select the profile just loaded.
Removing a profile
1 In the Profile list, select the profile to be deleted.
2 Press Remove key, then Exit .
About page
On the Setup screen, the softkey About , on the right of the screen,
allows to display information on scope and current test result displayed
(in Full Screen mode or mosaic mode - see
“Mosaic Mode” on page 46 ).
Fig. 21 Edition keypad for filenaming
Pre-defined
parameters
for filenaming