Viavi SmartOTDR 100, Руководство пользователя, Страница: 50 / 156

Chapter 5 Power meter & VFL (Visual Fault Locator)
Using the Power meter via USB port
32 User Manual 7SMART102 Rev002
Filenaming
Select Filenaming parameter and press the right arrow key to modify the
name of the file for the result trace.
In the edition keypad, enter a name manually for the file and/or use
the predefined parameters available (
Cable_Id , Fiber_Num ...).
Then, press Enter to validate.
or
Press
Default Filename to apply the name by default to the file:
Fiber[Cable_Id][Fiber_Num]_[Lambda]_[Direction]
The name of the file is displayed in grey under Filenaming parameter
Save Mode
When a trace or more is displayed, in the parameter Save Mode , you can
select three types of methods for storing traces:
File Only only the trace(s) is/are stored in one/several file(s),
with its extension (.sor, .msor)
File + txt the trace(s) is/are stored in one/several file(s), with its
extension and one txt file is also generated.
Display of
results and
commands
The results page called up by the
R
ESULTS
button
,
gives the information
relating to the measurement in progress, results previously saved and
the commands available for measurement and saving.
Result of the
measurement in
progress
The power measured by the power meter is displayed in large charac-
ters, in the units selected in the
S
ETUP
menu, together with:
– the mode of transmission of the signal measured: continuous (CW)
or modulated to a frequency of 270Hz, 330Hz, 1KHz, or 2KHz.
– the wavelength of the signal measured.
Fig. 17 Filenaming - Edition keypad
Predefined
parameters for
naming files