Viavi SmartOTDR 100, Руководство пользователя, Страница: 48 / 156

Chapter 5 Power meter & VFL (Visual Fault Locator)
Using the Power meter via USB port
30 User Manual 7SMART102 Rev002
coded the same way. This choice modifies the result
of the <Fiber Code> line. See
"Fiber Number / Fiber
Code" page 27 .
Cable content Shows how the color code is to be used (see figure
"Cable structure menu" page 29 ):
– Fiber Only the color code of the fiber is proposed
(example: «Gold»)
– Ribbon/Fiber The color code of the fiber is preceded by that
of the ribbon, and separated by a ’/’ (example:
’Bl/Or’)
– Tube/Fiber The color code of the fiber is preceded by that
of the tube, and separated by a ’/’ (example: ’Br/
Or’)
– Tube/Ribbon/Fiber
The color code of the fiber is preceded by that
of the tube, then by that of the ribbon; the three
being separated by a ’/’ (example: ’Br/Bl/Or’).
See
"Fiber Number / Fiber Code" page 27 .
Max tube Shows the maximum number of tubes in the cable for
the extremity selected. This information influences
the automatic coding of the fiber. See
"Fiber Number /
Fiber Code" page 27 .
Max ribbon Shows the maximum number of ribbons in the cable
for the extremity selected. This information influences
the automatic coding of the fiber. See
"Fiber Number /
Fiber Code" page 27 .
Max fiber Shows the maximum number of fibers in the cable for
the extremity selected. This information influences
the automatic coding of the fiber. See
"Fiber Number /
Fiber Code" page 27 .
Tube Coding, Ribbon Coding, Fiber Coding
The lines Tube Coding, Ribbon Coding and Fiber
Coding enable selection of the color coding of the
tube, the ribbon and the fiber from 5 different codes
described below: TIA, USER 1, USER 2, USER 3 and
USER 4.
NOTE
Some parameters are not valid in the configuration selected. Thus, if
no tube is selected in
Cable Content , all the lines relating to the tube
concept will be deactivated (grayed out in the menu).