Viavi SmartClass ORL-85 Скачать руководство пользователя страница 21

Страница: 21 / 95

ORL-85/ORL-85P

3 G

ETTING

TARTED

ONNECTING

OPTICAL

CABLES

Fig. 7

PS4: Changing the AC line plug adapter

To operate the ORL-85 from AC power:

Connect the PS4 DC power cord to the ORL-85 external power

supply connector.

(The connector is under the cover on the right side.)

Plug the PS4 into the AC line socket.

The ORL-85 switches on automatically when powered from the

PS4.

NOTE:

The PS4 provides power even if dry or rechargeable batteries are

inserted in the instrument.

The ORL-85 cannot be powered via the USB interface.

Connecting optical cables

Mounting test adapters

Viavi provides a number of test adapters for connecting the

ORL-85 to the interface to be tested.
You can connect all standard optical connector types to the

instrument using these adapters. The test adapters are suitable

for connectors with planar (PC) and angled end surfaces (APC).
Contact your local Viavi sales company for available adapter

types.
The ORL-85 connector type is APC for all versions. Please verify

that the patch cord used to connect the ORL-85 has an

appropriate connector type.
APC: BN2311/21/23

Содержание SmartClass ORL-85
































































































Результаты поиска

Содержание SmartClass ORL-85

Отзывы:

Похожие инструкции для SmartClass ORL-85

Бренды по названию

Популярные бренды

Viavi SmartClass ORL-85, Руководство по эксплуатации

Результаты поиска

Содержание SmartClass ORL-85

Отзывы:

Похожие инструкции для SmartClass ORL-85

Бренды по названию

Популярные бренды